Zipp 353 NSW Carbon Tubeless Clincher Disc Brake Front Wheel

The Zipp 353 NSW Carbon Tubeless Disc Brake Front Wheel is a 40mm hookless carbon front wheel with Zipp's Sawtooth rim profile, built around 30mm tires and weighing 580g including tape and valve. It is sold as a single front wheel for disc-brake road bikes running tubeless tires.

What sets this wheel apart from a conventional aero rim is the rim shape itself. Rather than a constant depth, the Sawtooth profile uses an undulating rim depth with Hyperfoil nodes and a HexFin ABLC dimple pattern, which Zipp designs for crosswind stability alongside low drag — the practical benefit being a 40mm wheel that stays settled when the wind picks up from the side. Underneath, the 25mm internal rim width is matched to 29 to 35c tires, and the ZR1 SL hubset runs custom hybrid ceramic bearings. Graphics are applied with Zipp's Impress process rather than adhesive decals.

Who It's For

• Road riders who want aero benefit without crosswind nervousness — the Sawtooth profile exists specifically to address that tradeoff
• Riders running 29 to 35c tubeless tires who want the lightest wheel in this depth range
• Riders replacing a front wheel or building a mixed wheelset
• Riders on SRAM AXS who want to add the Zipp AXS Wheel Sensor for tire pressure monitoring
• Consider something else if: your combined rider, bike, and gear weight approaches the 253lb / 115kg system weight limit, you want tires wider than 35c, you need pressure above 73psi, or you want a hooked rim with unrestricted tire choice

What to Look For

• Check the system weight limit first. At 253lb / 115kg, this wheel has a lower ceiling than several less expensive Zipp wheels. That is a hard spec, not a guideline.
• Tire range is narrower than it looks. Optimized for 30mm, rated 29 to 35c, with a 30mm maximum outside rim width. This is a road wheel, not a gravel wheel.
• Hookless sets the rules. ISO/TSS-compatible tires only, 73psi ceiling, tube or sealant. Confirm your current tires qualify before ordering.

Key Features

Rim: 40mm Sawtooth carbon, hookless, 25mm internal width, 30mm maximum outside width. The undulating depth with Hyperfoil nodes and HexFin ABLC dimples is the wheel's defining feature — it targets aero performance and crosswind stability at the same time rather than trading one for the other.

Hub and bearings: ZR1 SL hubset on custom hybrid ceramic bearings (61803 and 61803/61903). Hybrid ceramic bearings reduce rolling friction and are a meaningful part of why this wheel comes in at 580g in a 40mm depth.

Brake interface: Center Lock disc, with the lockring included.

Tire compatibility: 700c, ISO/TSS-compatible tubeless tires, 29 to 35c, run with sealant or a tube. Zipp cites TSE for improved efficiency and reduced rolling resistance.

Finish and connectivity: UD fiber with Impress graphics, which are applied into the surface rather than as stickers that can lift. Spoke lengths are 274/276mm drive side and 276/278mm non-drive side. Backed by a lifetime warranty.

Rider Intent Summary

• Biggest strengths: 580g at 40mm depth, Sawtooth crosswind stability, hybrid ceramic bearings, Impress graphics, and a lifetime warranty.
• Tradeoffs: A 253lb / 115kg system weight limit, a 29 to 35c tire range, a 73psi ceiling, and ISO/TSS tire restrictions.
• What makes it different: The undulating Sawtooth rim depth — this is not a smooth-profile aero wheel, and the crosswind behavior is the reason to choose it.

Victory's Take

At Victory Bicycle Studio we point riders to the 353 NSW when crosswind confidence matters as much as raw aerodynamics — it is the wheel we recommend for exposed, windy road riding, and we will check your system weight and tire compatibility with you before you commit.

Specifications

• Size - 700c
• Rim construction - Carbon – Hookless
• Tire compatibility - ISO/TSS compatible tubeless tires (29-35c), tube or sealant
• Rim depth - 40mm (Sawtooth undulating profile)
• Brake compatibility - Disc (Center Lock), lockring included
• Rim - inside width - 25mm
• Max outside width - 30mm
• Rim finish - UD fiber, Impress technology
• Hub - ZR1 SL
• Bearings - Custom Hybrid Ceramic - 61803, 61803/61903
• Max tire pressure - 73psi / 5.0bar
• Max recommended system weight - 253lbs / 115kg
• Spoke Length DS - 274mm, 276mm
• Spoke Length NDS - 276mm, 278mm
• Weight - 580g front wheel (approximate, tape and valve included)
• Warranty - Lifetime